HEMS — Intra-Aortic Balloon Pump Transport: Cardiogenic Shock Post-STEMI

Transport a 62-year-old male with cardiogenic shock on an IABP following failed PCI. Complete pre-transport IABP checklist, troubleshoot augmentation alarms, manage acute limb ischemia, and maintain hemodynamic stability throughout a 42-minute flight.

The call

DISPATCH — HEMS Inter-Facility: IABP Patient Post-STEMI

Dispatch: "MedFlight 4, inter-facility transport. Transferring: Referring Hospital Cath Lab. Receiving: receiving cardiac center. Patient is a 62-year-old male, post-STEMI with cardiogenic shock, on intra-aortic balloon pump (IABP). Interventional cardiologist requests urgent transfer for LVAD evaluation. Flight time: 42 minutes."

Transferring Cardiologist Report:
- Patient: 62 y/o male, 90 kg, PMHx: HTN, DM2, hyperlipidemia, 40 pack-year smoker
- Presentation: Anterior STEMI, Killip Class IV (cardiogenic shock), PCI attempted but LAD 100% occlusion — failed revascularization, TIMI 0 flow
- IABP: transport-compatible IABP console, 40 mL balloon, 1:1 augmentation, positioned correctly (CXR confirmed — tip approximately 2 cm above the carina, below the left subclavian origin, confirmed on the pre-transfer chest X-ray)
- Vitals: HR 108 (sinus tach), Unaugmented BP 88/62 (estimated MAP 71 mmHg), SpO2 94% on 6L NC, RR 22
- Hemodynamics: CI 1.6 L/min/m² (cardiogenic shock <2.0), PCWP 28 mmHg, SVR 1,840
- Medications: Norepinephrine 0.08 mcg/kg/min, heparin 1,200 units/hr (ACT 220; the cardiologist’s patient-specific target is 200–250 seconds), dobutamine 5 mcg/kg/min
- Access: Right femoral arterial line (IABP), left femoral venous sheath, right IJ triple-lumen CVC, 18g left AC

Cardiologist: "The balloon is running on the bedside monitor. Your transport team needs to manage the IABP in flight. He's on 3 drips. If the balloon stops, he'll crash."

Pre-Transport Assessment and IABP Evaluation

Your assessment:

Airway: Patent, speaking in short sentences, no stridor
Breathing: RR 22, SpO2 94% on 6L NC, bibasilar crackles (pulmonary edema)
Circulation: HR 108 sinus tach, unaugmented BP 88/62 (estimated MAP 71 mmHg); reported assisted pressure pair 108/72 requires waveform confirmation. A conventional 108/72 pressure pair gives estimated MAP 84 mmHg, not 71; assess IABP mean pressure from the integrated waveform, skin pale/cool/diaphoretic, cap refill 4 sec
Disability: Alert, anxious, oriented x3, GCS 15
Lines: Right femoral IABP, left femoral venous sheath, right IJ CVC, left AC 18g

IABP Assessment:
- Balloon catheter: 40 mL, 1:1 ratio (augments every beat)
- Trigger mode: ECG with an adequate R-wave; another trigger may be needed if the ECG is unreliable, with timing verified against the arterial waveform
- Augmentation waveform: Diastolic augmentation 108 mmHg, assisted systolic 88 mmHg ✓
- Helium tank: 85% full; verify manufacturer reserve requirements, battery runtime and expected transport time including delays
- Console: Transport-compatible console; fully charged battery and backup power plan verified

Key IABP transport rules:
1. Keep patient supine — NO hip flexion >30° (kinks catheter)
2. Maintain this patient’s ordered heparin unless the treating team changes it; anticoagulation targets are individualized
3. Monitor insertion-side limb perfusion (right leg — check pulses q15 min), left radial pulse and left arm perfusion
4. Helium tank level must be checked before transport
5. Choose a reliable trigger and verify inflation/deflation timing. Pressure triggering is an option in a regular rhythm when the ECG signal is inadequate

Right foot: Warm, DP pulse 2+ ✓ (no limb ischemia currently)

Decision 1 of 3: Decision 1: IABP Transport Setup

You are preparing to move the patient to the helicopter, and the IABP console must go with him. He is alert and anxious with bibasilar crackles, SpO₂ 94% on 6 L nasal cannula, HR 108 and unaugmented BP 88/62. The balloon runs 1:1 on ECG trigger, the helium tank reads 85%, and the right foot is warm with a 2+ DP pulse. Norepinephrine, dobutamine and heparin are running.

What is your most important pre-transport check?

  1. Verify power and helium reserves, switch to pressure triggering on the current timing settings, check distal perfusion and catheter position
  2. Verify power and helium reserves, set augmentation to 1:2 for the flight, check trigger/timing, distal perfusion and catheter position
  3. Verify power and helium, trigger/timing and distal perfusion, then sit him up at 45 degrees
  4. Verify power and helium reserves for the journey, trigger/timing, distal perfusion, ordered infusions and confirmed catheter position

Choose your answer to see the feedback. The rest of the case, the scored debrief and the Virtual FTO review come with a subscription.

Written and reviewed by Chester Shermer, MD, FACEP, board-certified emergency physician and HEMS medical director.

See plans · Play a full scenario free · All scenarios